Download And Install LeEco USB Drivers

If you want to Update Firmware on your smartphone or transfer files between your phone and your computer, so you should download the USB drivers for your LeEco smartphone and install LeEco USB Drivers on your computer successfully.

There are 4 types of LeEco USB Drivers file one is transfer files between your phone and your Windows computer and another is for Flashing your smartphone by computer.

Download LeEco USB Drivers

Notice: LeEco ADB Drivers Is Compatible Works with all LeEco phone

• Download LeEco ADB Driver For connecting your device to a computer: DOWNLOAD ADB Driver
• Download Qualcomm Driver For Flashing Firmware: Download Qualcomm Driver
• Download CDC Driver For Flashing Firmware: Download CDC Driver
• Download VCOM Driver For Flashing Firmware: Download VCOM Driver

How To Install LeEco ADB Driver In Computer

1- Download the LeEco ADB Driver and Unzip the file on your desktop

2- Then open Device Manager

3- Click on Action and Click on add the legacy hardware

4- click on Next

5- choose to Install the hardware that I manually select from the list (Advanced) and click on Next

6- choose Show all devices, and click on Next

7- Tap Have disk

8- select the Browse

9- Choose The LeEco USB drivers file and click open

10- choose android ADB interface and click on Next

11- To start installing your new hardware click Next

12- Click Finish

How To Install LeEco Qualcomm Driver In Computer

1. Download the LeEco Qualcomm Driver and Unzip the file on your desktop
2. open the setup file
3. After That Click on next
4. Select I accept the terms in the license agreement and click on next
5. Click Install
6. Select Finish

How To Install LeEco CDC Driver In Computer

1. Download the CDC Driver and Unzip the file on your desktop
2. open Device Manager
3. Click on add the legacy hardware
4. After That Click on next
5. choose to Install the hardware that I manually select from the list (Advanced)
6. Click on next
7. choose Show all devices and click on next
8. Click Next again
9. Select Finish

How To Install LeEco VCOM Driver In Computer

1. Download the VCOM Driver and Unzip the file on your desktop
2. open Device Manager
3. Click on add the legacy hardware
4. After That Click on next
5. choose to Install the hardware that I manually select from the list (Advanced)
6. Click on next
7. choose Show all devices and click on next
8. select usb2ser_Win7 for 32 bit or Choose usb2ser_Win764 for 64 bit
9. Click Next
10. Select Finish

Well done! The LeEco USB Drivers was installed successfully on your windows.