SP MultiPort Flash Tool allows you to install and flash stock firmware through the scatter file on MTK devices easily. Simply open the tool and download the scatter file to the tool and then press flash and the flash process began on your computer.
SP MultiPort Tool is not just for flashing firmware, it allows you to format/delete the bootloader of an MTK device, & Adjust and set the Flashing speed, Discover and read your Android MTK device with or without battery, and delete backup data for NVRAM (only for RID), remove OTP, or you can perform OTP format.
SP MultiPort Flash compatible with (Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10).
Download SP MultiPort Flash Tool
How to Use SP MultiPort Flash Tool to flash MTK Device
- Run multiporDownload_TOOL.exe:
- Click on Scatter File
- Navigate to the stock ROM folder and select MTxxxx_Android_Scatter.Txt and press Open.
- Now click on Scan & Connect your MTK Device:
- Turn off your device.
- Connect your MTK Device to your computer via USB cable.
- Click yes and hold volume up at the same time
- Click on start
- Once the bar turns yellow just wait till is it reaches 100%.
- That’s it ! you have successfully Update your MTK Mobile.